115V Electric Water Pressure Booster Pump - 5.5GPM 55 PSI RV Fresh Water Diaphragm Pump with Garden Hose Adapters for RV, Marine, Yacht | Perfect for Camping, Boating & Off-Grid Water Supply

5.5 GPM flow rate, delivers a consistent and efficient water transfer for various applications. 55 PSI pressure, ensures powerful water output. You can efficiently and consistently output water while watering your plants! Simple to install, this diaphragm electric water press pump is ideal for gardens, motorhomes, yachts, agricultural irrigation sprays and kitchens! Water Pump Specificaions: Volts: 115V ac Open Flow: 5.5GPM / 20.82LPM Pressure Setting: 55PSI / 3.79BAR Motor Power: 184 watts The pressure switch on the pump is set to turn off at 55psi. Water press booster pump operating pressure is typically around 40 psi. Adjst Pressure Switch: The pressure switch on the pump is set to turn off at 55psi. 1. Open the pressure switch cover with screwdriver. 2. Turn hex bolt clockwise pressure becomes larger, turn counterclockwise becomes smaller. TlP: When the pressure is insuffcient, rotate the pressure switch clockwise; Conversely, rotate counterclockwise Tips: 1. Tightly connect all parts to avoid leaks, or use sealing tape in combination with pump filters for better protection against pipe and tube leaks. 2. The pump can be mounted in any position. lf mounting the pump vertically. The pump head should be in the down position. Package Includes: 1 x Water Pump 1 x Mesh Inlet Strainer 2 × Hose Barbs 2 x Garden Hose Adapters 1 x Tape 1 x Small screwdriver Silent diaphragm electric water pump in operation, the sound is small, no longer have to worry about the sound noise noise to your rest! Electric water pump is perfect for tasks like cleaning, construction, or any situation where high pressure is needed. The water pump's 55 PSI pressure output is ideal for applications that require a strong water flow. Question: The water pump does not turn off when it reaches pressure or the faucet has been closed. 1. Check whether there is air leakage at the water inlet and inlet pipeline of the water pump. 2. Re-tighten the transparency cover of the strainer. 3. Check if the pressure switch is damaged. TlP: The inspection method of the pressure switch is to connect the two wires connecting the pressure switch, bypass the pressure switch it. lf the water pump starts to work, indicates that the pressure switch is damaged. (Make sure to test with the power off.）